Differences

This shows you the differences between two versions of the page.

--- en:station-supervisor [2014/06/15 10:34] – kakl
+++ en:station-supervisor [2014/06/18 14:47] – kaklik
@@ Line 2: / Line 2: @@
 Station Supervisor is a [[https://github.com/MLAB-project/station-supervisor|bundle of tools and scripts]] for remote control of station and supervising of station health.
-That tools run on the station side. There are also html page for displaying station health and last measured data. This webpage should be used for remote commands as well (for instance force kill or restart some process or reboot the station).
+These tools run on the station side. There are also html page for displaying station health and last measured data. This webpage should be used for remote commands as well (for instance force kill or restart some process or reboot the station).
 The measurement station are different in types (for instance radio detection station, video detection station, weather station).
@@ Line 8: / Line 8: @@
 ===== information Outputs =====
-==== Chybové výstupy ====
+==== Error outputs ====
-=== Seznam možných chybových  výstupů ===
+=== List of possible error outputs ===
-  * Není možné se připojit k datovému serveru
+  * Remote data storage server in inaccessible
-  * Dochází místo na úložném prostoru stanice
+  * Data storage capacity on station is near to limit.
-  * Neběží některé detektory.
+  * Some detectors are out of operation
-  * Nefunguje synchronizace času
+  * Time synchronization disfunction
 ==== Kontrolní výstupy ====