Differences

This shows you the differences between two versions of the page.

--- en:odroid-c1 [2015/01/31 10:12] – created vinchi9
+++ en:odroid-c1 [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Odroid C1 ======
+====== Single board ARM computer Odroid-C1 ======
-Schéma zapojení pinů: [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141578608433&tab_idx=2]]
+====== Expansion Connectors ======
+The Odroid-c1 povides one 40-pin dual row expansion header "**J2**".
+The location and pinout of these connectors is illustrated blew.\\ All signals on expansion headers are 3.3V except Analog input signal.
+----
+**J2 - 2x20 pins**
+^ Pin Number ^ Expansion Net Name ^ Description ^ Pin Number ^ Expansion Net Name ^ Description ^
+|1|3.3V Power|  |2|5.0V Power| |
+|3|I2CA_SDA| Export GPIO#74  |4|5.0V Power| |
+|5|I2CA_SCL| Export GPIO#75 |6|Ground| |
+|7|GPIOY.BIT3| Export GPIO#83, Wiring Pi GPIO#7|8|TXD1|Export GPIO#113|
+|9|Ground| |10|RXD1|Export GPIO#114|
+|11|GPIOY.BIT8| Export GPIO#88, Wiring Pi GPIO#0|12|GPIOY.BIT7|Export GPIO#87, Wiring Pi GPIO#1|
+|13|GPIOX.BIT19|Export GPIO#116, Wiring Pi GPIO#2|14|Ground| |
+|15|GPIOX.BIT18|Export GPIO#115, Wiring PI GPIO#3|16|GPIOX.BIT7|Export GPIO#104, Wiring Pi GPIO#4|
+|17|3.3V Power||18|GPIOX.BIT5|Export GPIO#102, Wiring Pi GPIO#5|
+|19|GPIOX.BIT10(MOSI)|Export GPIO#107, Wiring Pi GPIO#12, PWM1|20|Ground| |
+|21|GPIOX.BIT9(MISO)|Export GPIO#106, Wiring Pi GPIO#13|22|GPIOX.BIT6|Export GPIO#103, Wiring Pi GPIO#6|
+|23|GPIOX.BIT8(SPI_SCLK)|Export GPIO#105, Wiring Pi GPIO#14|24|GPIOX.BIT20|Export GPIO#117, Wiring Pi GPIO#10|
+|25|Ground| |26|GPIOX.BIT21|Export GPIO#118, Wiring Pi GPIO#11|
+|27|I2CB_SDA| Export GPIO#76 |28|I2CB_SCL| Export GPIO#77 |
+|29|GPIOX.BIT4|Export GPIO#101, Wiring Pi GPIO#21|30|Ground| |
+|31|GPIOX.BIT3|Export GPIO#100, Wiring Pi GPIO#22|32|GPIOX.BIT2|Export GPIO#99, Wiring Pi#26|
+|33|GPIOX.BIT11|Export GPIO#108, Wiring Pi GPIO#23, PWM0|34|Ground| |
+|35|GPIOX.BIT0|Export GPIO#97, Wiring Pi GPIO#24|36|GPIOX.BIT1|Export GPIO#98, Wiring Pi GPIO#27|
+|37|ADC.AIN1|10bit ADC#1 (0~1.8Volt)|38|1.8V Power|For ADC reference voltage. Output!|
+|39|Ground| |40|ADC.AIN0|10bit ADC#0 (0~1.8Volt)|
+[[http://odroid.com/dokuwiki/doku.php?id=en:c1_hardware|Source]]
 ===== I2C =====
+  modprobe aml_i2c
+[[http://odroid.com/dokuwiki/doku.php?id=en:c1_hardware_i2c|source]]