Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 18.116.238.86
Lock expires at: 2025/05/11 02:09 (13 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Power supply module UNIPOWER02A ======

[[http://www.mlab.cz/PermaLink/UNIPOWER02A| The original MLAB documentation]]

A power supply module with a cylindrical (circular?) connector, a fuse, an indicator LED and a slide switch.  The module has a __led-out signal__ informing about the state of connection of the cylindrical connector.

It is currently the most recent version of a power module for an external power adapter. 

Other features of the module include:

  * A switch-selectable power supply input.
  * An option to fit the module with a WAGO cage clamp terminal block or a FASTON connector.
  * An indicator of a turned-on state.
  * A circuit configurable for 12V or 5V.
  * The ground unconnected to the motherboard.



====== UNIPOWER01A ======

A universal input power supply module with HDD connector for 5V and 12V, cylindrical input connectors, __PPTCs__, emissions suppression and a power switch.   

The module also contains an indicator diode to signal a connected power supply.

An input voltage is distributed to other modules through ridged/crest [[cs:rules| connectors of a standard configuration]].

{{:unipower01a_top_big.jpg?direct&200|UNIPOWER01A Top}}

Powerful WAGO256 terminal blocks for a distribution of larger currents are included. However, it is possible to replace the cage clamp terminal block with cheaper FASTON connectors.