MLAB wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)//

====== Computers with ARM architecture in MLAB brick system ======

ARM architecture is currently developing rapidly, especially thanks to its excellent computing power with 1 W power consumption in contrast with obsolescent and more complicated Intel Ix86 architecture. This situation has been achieved over the last few years mostly thanks to its massive deployment in devices like tablets and telephones.

There are several computing machines based on this architecture suitable for development applications.

===== Single-board computers =====

There is already a [[http://en.wikipedia.org/wiki/List_of_single-board_computers|large number]] of computers of this kind - this section summarises the most interesting ones that had been tested in MLAB or applied in some of our designs.

==== HardKernel ODROID-C1 ====

A slightly more robust variant with a slower processor compared to [[en:odroid-u3|odroidu U3]]. For more detailed description see [[en:odroid-c1]].

{{ :cs:modules:arm:odroid:odroid-c1_top_big.jpg?direct&300 | ODROID C1 ve stavebnici MLAB.}}

==== HardKernel Odroid-U3 ====

It serves as a substitute for ODROD-X2 that is no longer produced. They have more or less identical parameters, only the PCB is smaller in size and some of the interfaces are no longer present. For more detailed description see [[en:odroid-u3]].

==== HardKernel Odroid-X2 ====

It is one of the first quadruple-core Cortex-A9 MPCore ARM computers with cores operating at frequencies up to 1.7 GHz. Operation memory 2GB is of PoP type and thus is soldered directly on the CPU chip. For more detailed description see [[en:odroid-x2]]. 
This computer contains GPU that does not yet support OpenCL.

<WRAP info> This development board is no longer produced. As a substitute it is possible to use ODROID-U3.</WRAP>

----
In reality, this computer also has CPU module placed on separate PCB connected by connectors. The module is however glued by epoxide to the main board - a concept similar to EOMA-68, only the CPU module cannot be replaced.

==== HardKernel Odroid-XU ====

Technically speaking, it is a successor of Odroid-X2 board with a newer CPU 4x Exynos5 Octa Cortex™-A15 1.6Ghz and 4x Cortex™-A7 - all of the 8 cores integrated into one chip. Both types differ significantly in computing power and thus in power consumption. The original idea behind this concept is, that the planner will decide about the usage of cores with low computing power or more powerful cores for running the system (thanks to integration of both CPU in one case, the tasks can be transferred quickly between the cores). The GPU PowerVR SGX544MP3 already supports OpenCL 1.1 and moreover, there is a USB 3.0 available on the board - an advantage especially when connecting newer versions of SDR receivers.

[[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620|Hardkernel sites]] - this board has not yet been tested in MLAB. It has an disadvantage of having an active cooling carried out by a fan, so the computer will not be completely noiseless. There may be problems with fan degradation and a spreading of vibrations.

==== Friendly ARM ====

An older single-board computer, which has been used in combination with MLAB brick system in several robotics projects. For more information see [[en:friendlyarm|Friendly ARM]]

==== Parallella ====

[[en:parallella|Parallella]] is a hybrid computer with ARM and FPGA. Furthermore, there is also a Epiphany III coprocessor placed on the board. The whole device is especially suitable for signal computations.

===== Embedded Open Modular Architecture/EOMA-68 =====

It is a concept using a physical specification of [[http://en.wikipedia.org/wiki/PC_Card|PCMCIA card]]. It is advantageous in that new ARM circuits are usually in BGA package that needs a multi-layer PCB, making the small-scale production of such devices very expensive.  [[http://elinux.org/Embedded_Open_Modular_Architecture/EOMA-68|EOMA-68 specification]] solves this problem by enclosing such PCB to a former PC Card format and leads the peripheries out in a standardised pin-format. Such card can be than used for various hardware realisations and can be produced in larger quantities, making the whole production process cheaper - for the end product, in which the card is implemented, two-layer PCB is sufficient.

Advantages:

* Device, into which the card is inserted, contains I2C EEPROM with identification 
  * It is possible to test and set the software up outside the ‘living’ operating system
  * The total costs of specialised hardware construction are cheaper
  * It is easy to actualise the computing unit by changing the card

Realisation on this concept:

* [[http://rhombus-tech.net/community_ideas/micro_engineering_board/|Micro Engineering Board]]
  * [[http://makeplaylive.com/index.html#/open-hardware/improv/discover|The Improv]]

===== Jetson TK1 Development Kit =====

[[https://developer.nvidia.com/jetson-tk1|Jetson TK1 Development Kit]] is a development board suitable mainly for CUDA and OpenCL testing on embedded devices. It is special in that it has an integrated powerful GPU unit. Furthermore it has Half mini-PCIE slot ports led out, but it does not have [[http://en.wikipedia.org/wiki/I%C2%B2S|I2S]] for audio input.

===== Usefulness =====

All of the above-mentioned computer contain [[cs:i2c|I²C]] bus, which makes it easy to connect various sensors or some simpler actuators. Furthermore, it commonly contains serial link that makes it able to connect GPS and [[en:time_sync|accurate time synchronisation ]].

A problem common to all the computers is a mechanical construction that is incompatible not only with MLAB brick system. Another issues is a production instability - most of the computers will not be produced the following year, or at least not in the above-mentioned configuration. Therefore, it will be useful to create an own open-source solution to computing hardware that can be used to build a network of detection and measuring stations.

Efforts to accomplish such goal are mentioned in [[http://en.wikipedia.org/wiki/Open-source_computing_hardware|open hardware list of computers]].

===== Native ARM MLAB modules =====

ARM modules for MLAB are limited only for ‘small’ ARMs’
Modulů na ARM má MLAB omezeny pouze na malé ARMy

* [[en:stm32f10xrxt|STM32F10xRxT01A]]

Existuje pak ještě i modul na nízkospotřebový ARM L150,,

===== Utilisation =====

==== SDR receiver ====

V kombinaci s moduly [[cs:sdrx|SDRX01B]] může vytvořit integrovaný SDR přijímač v krabici [[cs:unibox|UNIBOX01]] Stčí připojit monitor, klávesnici. Nebo případně doplnit modul s nekonečným knoflíkem.

==== Terminál inteligentní budovy ====

==== Staniční server k meteorologické stanici ====

ARM počítač lze použít v konstrukci [[cs:aws|AWS01B]]

===== Související stránky =====

* [[cs:ngw100|Atmel NGW100]]
  * [[cs:i2c|Sběrnice I²C ve stavebnici MLAB]]
  * [[cs:odroid-x2]]
  * [[http://www.kosagi.com/w/index.php?title=Novena_Main_Page|Opensource notebook Novea]]

Please fill all the letters into the box to prove you're human. J Y P B U Please keep this field empty:

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International