User Tools

Site Tools

Translations of this page?:

en:gpsdo

Precise frequency and clock signal generator GPSDO01A

This design is focused to generating precise frequency signal with good long term stability for laboratory use. (As frequency and time normal GPS satellite clocks are used) This design is bypass product of developing rmds and Atomic counter.

GPSDO01A prototype

The output frequency can be stabilized anywhere in 10-810 MHz range.

Device construction

GPSDO01A block schematics

Device consist following modules:

Function principle

Source of high frequency signal is free-running oscillator Si570 in module CLKGEN01B. This module is connected to divider CLKDIV01A and PIC16F887 MCU, which measures frequency of this oscillator. Interval of measurement is variable. Basic measurement calculates with one second τ interval. (period of GPS01A PPS signal can be adjusted. Thus frequency measurement can be averaged over period in fraction of seconds or tens of seconds for long term stability measurement.)

Measured data are stored in MCU memory and can be read by I²C interface. This is usually operated by host computer which computes frequency correction and apply a new frequency to si570 chip oscillator.

Frequency correction method is in principle software defined and AVAR characteristics of this frequency generator system can be adjusted to meet application requirements. Thus design can be refered as Software Defined GPS disciplined oscillator.

References

en/gpsdo.txt · Last modified: 2014/05/06 22:40 (external edit)