Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Hardkernel Odroid-X2 ======
+===== Hardware =====
+{{:cs:modules:odroidx2.jpg|}}{{:cs:modules:odroidtop.jpg?480|}} {{:cs:modules:odroidbottom.jpg?480|}}
+URL: http://www.hardkernel.com/renewal_2011/products/prdt_info.php?g_code=G135235611947
+==== Pinheader pin-out ====
+^PIN# 	^	Expansion net name for ODROID-X 	^	Pin name of Exynos4412 	^	Function 	^
+|	1	|	T_INT 	|	XEINT27 	|	GPX3[3]/WAKEUP_INT3[3]/KP _ROW11/ALV_DBG23 	|
+|	2	|	BL_EN 	|	UXuRTSn[2] 	|	GPA1[3]/UART_2_RTSn/I2C_3_SCL	|
+|	3	|	SDA 	|	Xi2 c1SDA 	|	GPD1[2]/I2C_1_SDA 	|
+|	4	|	T_RST 	|	XEINT17 	|	GPX2[1]/WAKEUP_INT2[1]/KP _ROW[1]/ALV_DBG13 	|
+|	5	|	SCL 	|	IXi2 c1SCL 	|	GPD1[3]/I2C_1_SCL	|
+|	6	|	SPI_1.CLK 	|	XspiCLK[1]	|	GPB[4]/SPI_1_CLK/IEM_SCLK 	|
+|	7	|	T_SCL 	|	XspiMOSI[0] 	|	GPB[3]/SPI_0_MOSI/I2C_5_SCL 	|
+|	8	|	T_SDA 	|	XspiMISO[0] 	|	GPB[2]/SPI_0_MISO/I2C_5_SDA 	|
+|	9	|	XE.INT12 	|	XEINT12 	|	GPX1[4]/WAKEUP_INT1[4]/KP _COL[4]/ALV_DBG[8] 	|
+|	10	|	SPI_1.CSN 	|	XspiCSn[1] 	|	GPB[5]/SPI_1_nSS/IEM_SPWI 	|
+|	11	|	SPI_1.MOSI 	|	XspiMOSI[1] 	|	GPB[7]/SPI_1_MOSI 	|
+|	12	|	VDDQ_LCD 	|		|		|	LDO25 of MAX77686
+|	13	|	PWM_BRT 	|	XpwmTOUT[1] 	|	GPD0[1]/TOUT_1/LCD_PWM 	|
+|	14	|	RXD 	|	XuRXD[3] 	|	GPA1[4]/UART_3_RXD/UART_AUDIO _RXD 	|
+|	15	|	SPI_1.MISO 	|	XspiMISO[1] 	|	GPB[6]/SPI_1_MISO 	|
+|	16	|	TXD 	|	XuTXD[3] 	|	GPA1[1]/UART_3_TXD/UART_AUDIO _TXD 	|
+|	17	|	VD19 	|	XvVD19 	|	GPF2[7]/LCD_VD19 	|
+|	18	|	VD21 	|	XvVD21 	|	GPF3[1]/LCD_VD21 	|
+|	19	|	VD2 	|	XvVD[2] 	|	GPF0[6]/LCD_VD[2] 	|
+|	20	|	VD8 	|	XvVD[8] 	|	GPF1[4]/LCD_VD[8] 	|
+|	21	|	VD15 	|	XvVD15 	|	GPF2[3]/LCD_VD15 	|
+|	22	|	VD0 	|	XvVD[0] 	|	GPF0[4]/LCD_VD[0] 	|
+|	23	|	VCLK 	|	XvVCLK 	|	GPF0[3]/LCD_VCLK 	|
+|	24	|	VD7 	|	XvVD[7] 	|	GPF1[3]/LCD_VD[7] 	|
+|	25	|	VD18 	|	XvVD18 	|	GPF2[6]/LCD_VD18 	|
+|	26	|	VD11 	|	XvVD11 	|	GPF1[7]/LCD_VD11 	|
+|	27	|	VSYNC 	|	XvVSYNC 	|	GPF0[1]/LCD_VSYNC 	|
+|	28	|	VD6 	|	XvVD[6] 	|	GPF1[2]/LCD_VD[6] 	|
+|	29	|	VDEN 	|	XvVDEN 	|	GPF0[2]/LCD_VDEN 	|
+|	30	|	VD20 	|	XvVD20 	|	GPF3[0]/LCD_VD20 	|
+|	31	|	HSYNC 	|	XvHSYNC 	|	GPF0[0]/LCD_HSYNC 	|
+|	32	|	GND 	|	Ground 	|		|
+|	33	|	VD3 	|	XvVD[3] 	|	GPF0[7]/LCD_VD[3] 	|
+|	34	|	VD12 	|	XvVD12 	|	GPF2[0]/LCD_VD12 	|
+|	35	|	VD5 	|	XvVD[5] 	|	GPF1[1]/LCD_VD[5] 	|
+|	36	|	VD10 	|	XvVD10 	|	GPF1[6]/LCD_VD10 	|
+|	37	|	VD14 	|	XvVD14 	|	GPF2[2]/LCD_VD14 	|
+|	38	|	VD17 	|	XvVD17 	|	GPF2[5]/LCD_VD17 	|
+|	39	|	VD9 	|	XvVD[9] 	|	GPF1[5]/LCD_VD[9] 	|
+|	40	|	VD23 	|	XvVD23 	|	GPF3[3]/LCD_VD23 	|
+|	41	|	VD1 	|	XvVD[1] 	|	GPF0[5]/LCD_VD[1] 	|
+|	42	|	VD4 	|	XvVD[4] 	|	GPF1[0]/LCD_VD[4] 	|
+|	43	|	VD22 	|	XvVD22 	|	GPF3[2]/LCD_VD22 	|
+|	44	|	VD13 	|	XvVD13 	|	GPF2[1]/LCD_VD13 	|
+|	45	|	VD16 	|	XvVD16 	|	GPF2[4]/LCD_VD16 	|
+|	46	|	SYS 	|	DC Jack +5V 	|		|
+|	47	|	ADC.AIN2 	|	XadcAIN[2] 	|	XadcAIN[2] 	|
+|	48	|	VDD_IO 	|	+1.8 V	|		|	LDO3 of MAX77686
+|	49	|	ADC.AIN3 	|	XadcAIN[3] 	|	XadcAIN[3] 	|
+|	50	|	GND 	|	Ground 	|
+=== Software Installation ===
+== To extract .xz file ==
+linux: tar xJf file.xz
+mac: tar -xJf file.xz
+windows: 7-zip
+== To write image to sd card from linux ==
+(umount before write)
+  umount /dev/sd[x]
+  dd if=image.img of=/dev/sd[x] bs=1M
+  sync
+where x is the sd card device (find with fdisk -l)
+use the whole device, not partition (correct: /dev/sdb, incorrect:/dev/sdb1)
+== To write image to sd card from mac os x ==
+(unmount before write and eject after write)
+hdiutil unmount /dev/disk[x]s[y]
+dd if=image.img of=/dev/rdisk[x] bs=1m
+hdiutil eject /dev/disk[x]
+where x is the sd card device (find with diskutil list)
+use the whole device, not partition (correct: /dev/rdisk1, incorrect:/dev/rdisk1p1)
+== To write image to sd card from windows ==
+use Win32DiskImager
+https://launchpad.net/win32-image-writer