Differences

This shows you the differences between two versions of the page.

--- en:sdrx [2013/07/26 10:11] – [Ideas for improvements] fluktuacia
+++ en:sdrx [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 169: / Line 169: @@
   * [[http://www.sm5bsz.com/linuxdsp/linrad.htm|Linrad]] - A Linux SDR receiving tool, that contains some of the more advenced functions (that are not included in HDSDR) like mirror signal rejection in various bands
   * [[http://www.qsl.net/d/dl4yhf/spectra1.html|Spectrum Lab]] - a utility for a various signal processing in the audible band. We mostly us it for [[http://wiki.meteory.sk/doku.php?id=cs:radio_navod|meteor detection]].
+  * [[https://github.com/MLAB-project/pysdr|pySDR]] - Our OpenGL powered waterfall software.
@@ Line 343: / Line 344: @@
 Adding more modules to the arrangement could create a complete set where the receiver would be independent on a computer. Its realisation has several variants:
-  * The receiver with a tunable oscillator and module with LDC that would show the tuned frequency. The buttons below the LCD would allow the retuning of the receiving frequency.
+  * The receiver with a tunable oscillator and a module with LDC that would show the tuned frequency. The buttons below the LCD would allow the retuning of the receiving frequency.
-  * A second variant would be the same as the first one, with an exception of digitising the analog output, that would be transmitted through some kind of a common interface to a computer (USB, ThunderBolt, Ethernet, ...). The same interface could be used for LO tuning as well.
+  * A second variant would be the same as the first one, with an exception of digitizing the analog output, that would be transmitted through some kind of a common interface to a computer (USB, ThunderBolt, Ethernet, ...). The same interface could be used for LO tuning as well.
 ====== UHF SDR SDRX02A receiver ======
-**The design of the receiver described below is still only in preliminary stage of development**
+**The design of the receiver described below is still only in a preliminary stage of development**
-The design should probably be even more modular. That includes separate VGA input amplifier, input band-pass filter, I/Q demodulator with input band-pass filter.
+The design should probably be even more modular. That includes a separate VGA input amplifier, an input band-pass filter, an I/Q demodulator with an input band-pass filter.
-ACD with parallel anti-alias filter and FPGA with parallel USB interface.
+ACD with a parallel anti-alias filter and FPGA with a parallel USB interface.
@@ Line 373: / Line 374: @@
 **The design of the receiver described below is still only in preliminary stage of development**
-The design should include separate input amplifier (VGA), input band-pass filter to limit the possible intermodulation, I/Q demodulator with input band-pass filter.
+The design should include a separate input amplifier (VGA), an input band-pass filter to limit the possible intermodulation, an I/Q demodulator with an input band-pass filter.
-Analog Frond End ADC with input anti-alias filter and FPGA with PCIe interface for connection to the thunderbolt module.
+Analog Frond End ADC with input an anti-alias filter and FPGA with a PCIe interface for connection to the thunderbolt module.