MLAB wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Station Supervisor ======

Station Supervisor is a [[https://github.com/MLAB-project/station-supervisor|bundle of tools and scripts]] for remote control of station and supervising of station health.
These tools run on the station side. There are also html page for displaying station health and last measured data. This webpage should be used for remote commands as well (for instance force kill or restart some process or reboot the station).
The measurement station are different in types (for instance radio detection station, video detection station, weather station).

===== Information Outputs =====

==== Error outputs ====

=== List of possible error outputs ===

* Remote data storage server in inaccessible 
  * Data storage capacity on station is near to limit. 
  * Some detectors are out of operation
  * Time synchronization disfunction

==== Service outputs ====

Service outputs should be displayed on station screen or serial (RS232 console). Displayig application (ssmon) should use minimal terminal graphics.

=== List of basic service outputs ===

* Time synchonisation quality measurement (NTPd and GPSd outputs)
  * System load
  * System temperatures

===== Service interface =====

Service interface software should modify some station parameters by download configuration files from data server.

Please fill all the letters into the box to prove you're human. S A Z L C Please keep this field empty:

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International