Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
-====== SYMPOWER01A ======
-The module creating a symmetrical power supply for analog constructions with operational amplifiers (e.g. [[en:sdrx|SDRX01B]] receiver). The input voltage should be +12V or +5V and will be converted to -12V and +12V.
-==== Construction solutions ====
-=== Charge pump ===
-One of the possibilities, how to create a negative voltage, is to use a charge pump. There already exist specialised integrated circuits suitable for this purpose.
-  * [[http://www.linear.com/product/LTC3260|LTC3260]]
-=== __Power inverter__ ===
-One of the limitations of the charge pump is the impossibility to obtain larger supply currents. The problem can be solved using a transformer and wiring, that will __convert__ the input DC voltage to AC. Given that the converted voltage can be of significantly higher frequency than the usual 50Hz, the size of the transformer, having the same output, can be much smaller. The higher frequency also allows to reduce the __smoothing__ capacity.
-Moreover, in the case of input DC potential commuting sinusoidally on the transformer windings, the possibility of noise emission is considerably decreased compared to the conventional SMPS.
-Another advantage in using the transformer is, that the output power supply can be galvanically isolated from the input power supply.