User Tools

Site Tools


en:sympower

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:sympower [2013/07/24 19:21] – created fluktuaciaen:sympower [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
 ====== SYMPOWER01A ====== ====== SYMPOWER01A ======
  
-The module creating a symmetrical power supply for analog constructions with operational amplifiers (e.g. SDRXO1B receiver). The input voltage should be +12V or +5V and output __respectively__ -12V and +12V. +The module creating a symmetrical power supply for analog constructions with operational amplifiers (e.g. [[en:sdrx|SDRX01B]] receiver). The input voltage should be +12V or +5V and will be converted to -12V and +12V.
  
  
Line 10: Line 9:
 === Charge pump === === Charge pump ===
  
-One of the possibilities, how to create a negative voltage, is to use a charge pump. There already exist specialised integrated circuits suitable for this purpose+One of the possibilities, how to create a negative voltage, is to use a charge pump. There already exist specialised integrated circuits suitable for this purpose.
  
   * [[http://www.linear.com/product/LTC3260|LTC3260]]    * [[http://www.linear.com/product/LTC3260|LTC3260]] 
  
  
-=== __Power inverter__ ===+=== Power inverter ===
  
-One of the limitations of the charge pump is the impossibility to obtain larger supply currents. The problem can be solved using a transformer and connectionthat will make the input DC voltage +One of the limitations of the charge pump is the impossibility to obtain larger supply currents. The problem can be solved using a transformer and electronic circuitwhich convert the input DC voltage to AC. Given that the converted voltage can be of significantly higher frequency than the usual 50 Hz, thus the size of the transformer, having the same power output, can be much smaller. The higher frequency also allows to reduce the smoothing capacity values. 
  
-Omezením nábojové pumpu je obvykle nemožnost získat větší napájecí proudy. To lze řešit použitím transformátoru a zapojením,které rozstřídá vstupní stejnosměrné napětí. Vzhledem k tomuže toto napětí mlže být střídáno na podstatně vyšších frekvencích než je běžných 50Hz, tak rozměry transformátoru mohou být při stejných výkonech podstatně menší. Vyšší frekvence pak navíc umožňuje zmenšit vyhlazovací kapacity+Moreoverin the case of input DC potential commuting sinusoidally on the transformer windingsthe possibility of noise emission is considerably decreased compared to the conventional SMPS.
  
-Navíc v případěže vstupní stejnosměrný potenciál je na vinutí transformátoru komutován sinusově, tak je značně potlačena možnost vyzařování rušení na rozdíl od klasického spínaného zdroje+Another advantage in using the transformer isthat the output power supply can be galvanically isolated from the input power supply.
  
-Použití transformátoru navíc přináší výhodu, že výstupní napájení může být galvanicky oddělené od vstupního.   
  
    
en/sympower.1374693718.txt.gz · Last modified: 2013/07/24 19:21 (external edit)