MLAB wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Power supply module UNIPOWER02A ======

[[http://www.mlab.cz/PermaLink/UNIPOWER02A| The original MLAB documentation]]

A power supply module with a cylindrical connector, a fuse, an indicator LED and a slide switch.  The module has a output signal informing about the state of connection of the cylindrical connector.

It is currently the most recent version of a power module for an external power adapter.

Other features of the module include:

* A switch-selectable power supply input.
  * An option to fit the module with a WAGO cage clamp terminal block or a FASTON connector.
  * An indicator of a turned-on state.
  * A circuit configurable for 12V or 5V.
  * The ground unconnected to the motherboard.

====== UNIPOWER01A ======

A universal input power supply module with HDD connector for 5V and 12V, cylindrical input connectors, [[https://en.wikipedia.org/wiki/Resettable_fuse|PPTCs]], emissions suppression and a power switch.

The module also contains an indicator diode to signal a connected power supply.

An input voltage is distributed to other modules through pin-header [[cs:rules| connectors of a standard configuration]].

Powerful WAGO256 terminal blocks for a distribution of larger currents are included. However, it is possible to replace the cage clamp terminal block with cheaper FASTON connectors.

Please fill all the letters into the box to prove you're human. V V T Z V Please keep this field empty:

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International