MLAB wiki

Uživatelské nástroje

Nástroje pro tento web

Historie:
cs:duckweed_collector

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

Odkaz na výstup diff

Obě strany předchozí revizePředchozí verze
Následující verze		Předchozí verze
cs:duckweed_collector [2014/08/17 10:00] – kaklcs:duckweed_collector [Neznámé datum] (aktuální) – upraveno mimo DokuWiki (Neznámé datum) 127.0.0.1
Řádek 1: Řádek 1:
 ====== Žabincosběrač I ====== ====== Žabincosběrač I ======
  
-Loď na uklízení žabince z rybníku. +Loď na uklízení žabince z rybníku. Jinak demonstrační konstrukce dálkově řízené lodi s vrtulovým pohonem. 
  
 [[http://www.youtube.com/user/kaklcz#p/a/u/0/NQGEWCW1xCg|Žabincosběrač v akci]] [[http://www.youtube.com/user/kaklcz#p/a/u/0/NQGEWCW1xCg|Žabincosběrač v akci]]
  
-Brushless Motor Controller (ESC) +===== Brushless Motor Controller (ESC) ===== 
-Thanks for using Turborix (AE) Brushless Motor Controllers. Please read the instructions+ 
 +Turborix (AE) Brushless Motor Controllers. Please read the instructions
 carefully before you start to use new controllers. carefully before you start to use new controllers.
 The ESCs use higher quality micro processor and more FETs with lower intemal The ESCs use higher quality micro processor and more FETs with lower intemal
 resistance. As such, they outperform many other ESCs. In particular, they have extremely resistance. As such, they outperform many other ESCs. In particular, they have extremely
 performance-cost ratio. performance-cost ratio.
-Technical details: + 
-Model Current (A) BEC Cells Weight (g) +[[http://www.mlab.cz/WebSVN/filedetails.php?repname=MLAB&path=%2FDesigns%2Fduckweed_collector%2FDOC%2FTurborix_AE_BrushlessMotorController.pdf|Manual]] 
-FM10A 10 Max 1A NiCd/NiMh 6-12 10 +==== Technical details: ==== 
-Li-Po +Model FM10A 
-FM20A +Current 10 (A)  
-20 +BEC Max 1A 
-Max 2A +Cells NiCd/NiMh 6-12; 2-3 Li-Po 
-NiCd/NiMh 6-12 +Weight 10 (g) 
-Li-Po +
-FM30A +
-30 +
-Max 3A +
-40 +
-OPTO +
-FM60A +
-60 +
-OPTO +
-FM80A +
-80 +
-OPTO +
-FM120A +
-120 +
-OPTO +
-55 +
-3-6 +
-NiCd/NiMh 8-18 +
-Li-Po +
-55 +
-3-6 +
-NiCd/NiMh 8-18 +
-Li-Po +
-35 +
-3-6 +
-NiCd/NiMh 8-18 +
-Li-Po +
-25 +
-2-3 +
-NiCd/NiMh 8-18 +
-Li-Po +
-18 +
-2-3 +
-NiCd/NiMh 6-12 +
-Li-Po +
-FM40A +
-2-3 +
-78 +
-3-6 +
-Diagram for FM10A, FM20A, FM30A +
-DC Power +
-ESC +
-BEC +
-Throttle +
-signal +
-(Receiver) +
-Signal from receiver and +
-provide power to receiver +
-Diagram For FM40A, FM60A ,FM80A, FM120A +
-DC Power +
-ESC +
-BEC +
-Throttle signal (Receiver) +
-Signal from receiver +
-5V DC power+
 Main functions: Main functions:
 1. Safety mode: the motor won’t start no matter what the position of the control stick is 1. Safety mode: the motor won’t start no matter what the position of the control stick is
 when switched on the RC unit. When the throttle is not at lowest or Max position, it will when switched on the RC unit. When the throttle is not at lowest or Max position, it will
-sound by “di-di-di” for warning.2. Brake: On / Off (factory setting is Off).+sound by “di-di-di” for warning. 
 + 
 +2. Brake: On / Off (factory setting is Off). 
 3. Battery type: NiCd/NiMh, LiPo. 3. Battery type: NiCd/NiMh, LiPo.
 +
 4. Number of batteries: automatic (when setting Battery Type, the ESC will set Number 4. Number of batteries: automatic (when setting Battery Type, the ESC will set Number
 of Batteries automatically at the same time) of Batteries automatically at the same time)
 +
 5. Start up mode: Soft start up, Hard start up 5. Start up mode: Soft start up, Hard start up
 +
 6. Timing mode: Soft timing-for 2, 4, 6 pole brushless motors, Hard timing-for 6 and more 6. Timing mode: Soft timing-for 2, 4, 6 pole brushless motors, Hard timing-for 6 and more
 pole motors, Auto pole motors, Auto
 +
 7. Temperature protection: the controller will reduce output power when temperature 7. Temperature protection: the controller will reduce output power when temperature
 reaches 120 degrees centigrade reaches 120 degrees centigrade
 +
 8. Low voltage protection: reduce output power when the voltage goes down below the 8. Low voltage protection: reduce output power when the voltage goes down below the
 setting (setting of low voltage is 2.8V times number of batteries) setting (setting of low voltage is 2.8V times number of batteries)
 +
 Operating instructions: Operating instructions:
 +
 - Normal start up: - Normal start up:
 +
 Connect the controller and motor as above connection drawing. Switch on the transmitter Connect the controller and motor as above connection drawing. Switch on the transmitter
 and check the throttle stick at lowest position. Connect the main power pack and switch on and check the throttle stick at lowest position. Connect the main power pack and switch on
Řádek 95: Řádek 53:
 stick is not at lowest position, you will hear “di-di-di”, that alarms you moving the stick to stick is not at lowest position, you will hear “di-di-di”, that alarms you moving the stick to
 lowest position. lowest position.
 +
 - Set up by Throttle Stick: - Set up by Throttle Stick:
 Connect controller with motor as above connection diagram. Switch on the transmitter and Connect controller with motor as above connection diagram. Switch on the transmitter and
Řádek 104: Řádek 63:
 above steps for other settings. After your setting, keep the stick at lowest position for 5 above steps for other settings. After your setting, keep the stick at lowest position for 5
 seconds, you will hear a piece of music. Now, you can begin flying. seconds, you will hear a piece of music. Now, you can begin flying.
 +
 Prompting Sound: Prompting Sound:
 +
 1. Brake On: - - - 1. Brake On: - - -
 +
 2. Brake Off: - - - - - - 2. Brake Off: - - - - - -
 +
 3. NiCd / NiMh: . - . - . - 3. NiCd / NiMh: . - . - . -
 +
 4. LiPo: . -- . -- . – 4. LiPo: . -- . -- . –
 +
 5. Soft Start up: .. - .. - .. – 5. Soft Start up: .. - .. - .. –
 +
 6. Hard Start up: .. -- .. -- .. – 6. Hard Start up: .. -- .. -- .. –
 +
 7. Soft Timing: ... “ ...” ...” 7. Soft Timing: ... “ ...” ...”
 +
 8. Hard Timing: ,,, -- ,,, -- ,,, -- 8. Hard Timing: ,,, -- ,,, -- ,,, --
 +
 9. Reset to Factory Setting: ... ... ... 9. Reset to Factory Setting: ... ... ...
 +
 The controllers are supplied with factory setting, Brake Off, Soft start up and Auto timing. The controllers are supplied with factory setting, Brake Off, Soft start up and Auto timing.
 Note: when the first time of using the ESC, or when changing number of batteries, Note: when the first time of using the ESC, or when changing number of batteries,
 or when changing battery type, the setting of Battery Type must be done every time. or when changing battery type, the setting of Battery Type must be done every time.
-Programming Card: + 
-Turborix (AE) ESC can be programmed by a E-PRG-1 programming card. It will expand + 
-ESC’s functions and suitability. Details please see the instructions of E-PRG-1 +==== TODO ==== 
-Programming Card.Notice: + 
-1. Every Turborix (AE) ESC of FM10A, FM20A and FM30a has a BEC plug (JR +=== Dálkové ovládání === 
-connector), it is for connecting to receiver and also for connecting to Programming + 
-Card. For FM40A, FM60A, FM80A and FM120A there are two JR connectors on each +  * Nahradit mechanický křížový ovladač magnetickým joystickem tisknutelným na 3D tiskárně. 
-ESC. The one with long wire is for connecting to receiver. The one with short wire is +  * Zvážit nahrazení ovladače smartphonem.  
-for connecting to Programming Card. +  * Použít modul [[cs:ant]] 
-2. Choose suitable brushless motors and propellers, ensure the working current never + 
-exceed specified current of ESC. +=== Loď === 
-3. Make sure the connecting for battery positive and negative is right. Reversing the + 
-connection will damage the ESC permanently. +  * Vyřešit vícečlánkové napájení modulem [[cs:lion2cell]] 
-4. Use suitable batteries, do not exceed specified voltage of ESC. +  * Zatáčení kormidlem na servu nahradit dvěma dmychadly s krytými vrtulemi. 
-5. Do not disassemble the ESC by self, it will damage the ESC or lose message. +  * Upravit konstrukci jako nosnou pro ponorku.  
-6. The ESCs are designed for airplane models only. + 
-7. Take care in using safely. Incorrect use may cause injury to the body. The company +
-will not be responsible for any damage or loss caused by incorrect operation. +
-8. Reverse the motor direction by exchanging the position of any two connections to the +
-motor. +
-Warning: +
-The propellers on turning are dangerous. Disconnect the main power +
-pack immediately after flying. +
-Turborix (AE) keeps the rights to change design, function or package, +
-without notice.+
cs/duckweed_collector.1408269616.txt.gz · Poslední úprava: 2014/08/17 10:00 (upraveno mimo DokuWiki)